************************************************************
************************************************************
This document outlines the procedure for manually removing 
the Intel(R) Rapid Storage Technology driver software and
reconfiguring the system to use the native operating system
driver for managing storage controllers.

To complete this procedure, first print this document for use
as a reference. Then, complete Part 1 to determine the SATA
controller mode. Depending on the mode determined in Part 1, 
complete either Part 2A or 2B.

WARNING: Reconfiguring the system may result in the loss of 
data on any RAID volumes currently used by the system. Removing 
the Intel Rapid Storage Technology driver from the boot drive or 
bootable RAID volume may require reinstallation of the 
operating system. To preserve data integrity, back up 
all data before proceeding. 

************************************************************
* Part 1: Determining the System Mode
************************************************************

The steps for removing this software differ depending on 
whether the system is running in RAID or AHCI mode.

Determine the system's mode by identifying how the SATA 
controller is presented within the Device Manager by 
completing the steps below:

1.  On the Start menu, select Control Panel.

In Microsoft Windows XP*:

2.  Double-click 'System' from the Classic View.

3.  Select the 'Hardware' tab.

4.  Click 'Device Manager'.

5.  In the Device Manager window, look for an entry named 
    SCSI and RAID Controllers. If this entry is present, 
    expand it and look for one of the following controllers. 
    Otherwise, proceed to step 6:

In Microsoft Windows Vista* or higher:
    
2.  Double-click 'System' from the Classic View (or the 
    small or large icon view in Windows 7*).

3.  Select 'Device Manager' in the left pane.

4.  In the Device Manager window, look for an entry named 
    Storage Controllers. If this entry is present, expand it
    and look for one of the following controllers. Otherwise,
    proceed to step 6:

    - 'Intel(R) ICH7R/DH SATA RAID Controller'
      If the controller above is present, the system is an
      ICH7R/DH system in RAID mode. 
      Continue with Part 2A below.

    - 'Intel(R) ICH7MDH SATA RAID Controller'
      If the controller above is present, the system is an 
      ICH7MDH system in RAID mode. 
      Continue with Part 2A below.
    
    - 'Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller'
      If the controller above is present, the system is a 
      Desktop/Workstation/Server Express Chipset system in RAID mode.
      Continue with Part 2A below.   
    
    - 'Intel(R) Mobile Express Chipset SATA RAID Controller'
      If the controller above is present, the system is a 
      Mobile Express Chipset system in RAID mode. 
      Continue with Part 2A below.
  
    - If none of the controllers above are shown, then 
      the system is not running in RAID mode. 
      Continue with step 6 below.

6.  In the Device Manager window, look for an entry named 
    'IDE ATA/ATAPI controllers'.
    If this entry is present, expand it and look for one of
    the following controllers:

    - 'Intel(R) ICH7R/DH SATA AHCI Controller'
      If the controller above is present, the system is an
      ICH7R/DH system in AHCI mode. 
      Continue with Part 2B below.

    - 'Intel(R) ICH7M/MDH SATA AHCI Controller'
      If the controller above is present, the system is an 
      ICH7M/MDH system in AHCI mode. 
      Continue with Part 2B below.

    - 'Intel(R) ICH10R SATA AHCI Controller'
      If the controller above is present, the system is an 
      ICH10R system in AHCI mode. 
      Continue with Part 2B below.

    - 'Intel(R) ICH9M-E/M SATA AHCI Controller'
      If the controller above is present, the system is an 
      ICH9M-E/M system in AHCI mode. 
      Continue with Part 2B below.
   
    - 'Intel(R) ICH10D/DO SATA AHCI Controller'
      If the controller above is present, the system is an 
      ICH10D/DO system in AHCI mode. 
      Continue with Part 2B below.

    - 'Intel(R) 5 Series 4 Port SATA AHCI Controller'
      If the controller above is present, the system is a 
      5 Series 4 Port system in AHCI mode. 
      Continue with Part 2B below.

    - 'Intel(R) 5 Series 6 Port SATA AHCI Controller'
      If the controller above is present, the system is a 
      5 Series 6 Port system in AHCI mode. 
      Continue with Part 2B below.

    - 'Intel(R) 5 Series/3400 Series SATA AHCI Controller'
      If the controller above is present, the system is a 
      5 Series/3400 Series system in AHCI mode. 
      Continue with Part 2B below.
      
    - 'Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller'
      If the controller above is present, the system is a 
      Desktop/Workstation/Server Express Chipset system in AHCI mode. 
      Continue with Part 2B below.
      
    - 'Intel(R) Mobile Express Chipset SATA AHCI Controller'
      If the controller above is present, the system is a 
      Mobile Express Chipset system in AHCI mode. 
      Continue with Part 2B below.

    - 'Intel(r) 7 Series/C216 Chipset Family SATA AHCI Controller'
      If the controller above is present, the system is a 
      7 Series/C216 Chipset Family system in AHCI mode. 
      Continue with Part 2B below.

    - 'Intel(r) 7 Series Chipset Family SATA AHCI Controller'
      If the controller above is present, the system is a 
      7 Series Chipset Family system in AHCI mode. 
      Continue with Part 2B below.

    - If none of the controllers above are shown, then 
      the system is not in AHCI mode. No other modes are 
      supported by the Intel Rapid Storage Technology 
      software. Continue with step 7 below.

7.  The system does not appear to be running in RAID or 
    AHCI mode. If you feel that the system is running in 
    RAID or AHCI mode and you do not see any of the 
    controllers listed above, contact the system manufacturer 
    or the place of purchase for assistance. You cannot 
    continue with Part 2 below until the system mode is 
    determined.



************************************************************
* Part 2A: System in RAID Mode
************************************************************

The procedure in this section can only be performed on a 
system that is in RAID mode. Do not continue with this 
procedure unless you have completed the steps in Part 1
above to determine this is true for this system. Before 
continuing, be sure to read the warnings below.

WARNINGS:
a. If a RAID 0 volume is deleted, all data on that volume 
   will be permanently deleted. Back up all critical data 
   before continuing. 

b. If system files are located on a disk or volume connected 
   to the RAID controller, these files will be deleted and the 
   operating system will have to be reinstalled.


1.  Ensure you have read and understand the warnings listed
    above.

2.  Reboot the system.

3.  Note whether you see a splash screen titled 'Intel(R)
    Rapid Storage Technology - Option ROM' during 
    the system startup. If so, continue with step 4 below. 
    If not, skip step 4 and continue with step 5 below.     

4.  Complete this procedure if the option ROM is installed:

    4a. Enter the option ROM Configuration Utility by pressing 
	Ctrl-I when prompted during the system startup.
    4b. In the setup program, select menu option 2 to enter 
	'Delete RAID Volume' menu.
    4c. Select the volume you want to delete using up or down 
        arrow keys.
    4d. Press 'Del' key to delete the selected volume, and 
        press 'Y' to confirm deletion. Repeat this step as 
        necessary to delete all volumes that are present. 
    4e. Exit the setup program.
    4f. Enter the system BIOS Setup (usually done by either 
        pressing a key 'F2' or 'Delete' as soon as the system 
	begins to boot).
    4g. Change the IDE configuration for the Serial ATA
        Controller from 'RAID' to 'IDE'.
    4h. Save changes and exit the system BIOS setup.

5.  Complete this procedure if the option ROM is not installed:

    5a. Enter the system BIOS Setup (usually done by either
        pressing a key such as 'F2' or 'Delete' as soon 
        as the system begins to boot).
    5b. Change the IDE configuration for the Serial ATA
        Controller from 'RAID' to 'IDE'.
    5c. Save changes and exit the system BIOS setup.

6.  Reboot the system.



************************************************************
* Part 2B: System in AHCI Mode
************************************************************

The procedure in this section can only be performed on a 
system that is in AHCI mode. Do not continue with this 
procedure unless you have completed the steps in Part 1
above to determine this is true for this system. It is
recommended that you back up all important data 
before continuing. 

1.  Reboot the system.

2.  Enter the system BIOS Setup (usually done by either
    pressing a key such as 'F2' or 'Delete' as soon as 
    the system begins to boot). 

3.  Change the IDE configuration for the Serial ATA
    controller from 'AHCI' to 'IDE'.

4.  Save changes and exit the system BIOS setup.

5.  Reboot the system. The operating system should 
    start as before.


Note: If you experience any difficulties making these 
changes to the system BIOS, please contact the motherboard 
manufacturer or the place of purchase for assistance.


************************************************************
* DISCLAIMER
************************************************************

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS.
NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS
PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL
ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY
OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER
INTELLECTUAL PROPERTY RIGHT.

UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT 
DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL
PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

Intel may make changes to specifications and product descriptions at any
time, without notice. Designers must not rely on the absence or 
characteristics of any features or instructions marked "reserved" or "undefined". 
Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from 
future changes to them. The information here is subject to change without 
notice. Do not finalize a design with this information.

The products described in this document may contain design defects or
errors known as errata which may cause the product to deviate from 
published specifications. Current characterized errata are available on 
request.

Contact your local Intel sales office or your distributor to obtain the 
latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this
document, or other Intel literature, may be obtained by calling 
1-800-548-4725, or go to: http://www.intel.com/#/en_us_01 

Intel(R) is a trademark of Intel Corporation in the U.S. and other countries.

* Other names and brands may be claimed as the property of others


Copyright (c) 2001-2011, Intel Corporation. All rights reserved.