smartctl 6.0 2012-10-10 r3643 [i686-w64-mingw32-win7-sp1] (sf-6.0-1)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

Vendor:               HP      
Product:              DF0146B8052     
Revision:             HPD1
User Capacity:        146'815'737'856 bytes [146 GB]
Logical block size:   512 bytes
Logical Unit id:      0x5000c50004ebf943
Serial number:        3QN08B5900009910XYTC
Device type:          disk
Transport protocol:   SAS
Local Time is:        Tue May 20 22:17:39 2014 MS
Device supports SMART and is Enabled
Temperature Warning Enabled
Log Sense failed, IE page [Input/output error]

Current Drive Temperature:     44 C
Drive Trip Temperature:        68 C
Elements in grown defect list: 0
Vendor (Seagate) cache information
  Blocks sent to initiator = 4269132111
  Blocks received from initiator = 4065350380
  Blocks read from cache and sent to initiator = 2074898680
  Number of read and write commands whose size <= segment size = 1122402790
  Number of read and write commands whose size > segment size = 9341
Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 29939.57
  number of minutes until next internal SMART test = 16

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0          0.000           0
write:         0        0         0         0          0          0.000           0

Non-medium error count:        0

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background long   Completed                   -   29937                 - [-   -    -]
# 2  Background long   Completed                   -   25898                 - [-   -    -]

Long (extended) Self Test duration: 1113 seconds [18.6 minutes]

Background scan results log
  Status: waiting until BMS interval timer expires
    Accumulated power on time, hours:minutes 29939:34 [1796374 minutes]
    Number of background scans performed: 1782,  scan progress: 0.00%
    Number of background medium scans performed: 1782
Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 5
  number of phys = 1
  phy identifier = 0
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; 1.5 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000c50004ebf941
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0
relative target port id = 2
  generation code = 5
  number of phys = 1
  phy identifier = 1
    attached device type: end device
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; 3 Gbps
    attached initiator port: ssp=1 stp=1 smp=1
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000c50004ebf942
    attached SAS address = 0x500e01800006c2c3
    attached phy identifier = 1
    Invalid DWORD count = 12
    Running disparity error count = 12
    Loss of DWORD synchronization = 4
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 12
     Running disparity error count: 12
     Loss of dword synchronization count: 4
     Phy reset problem count: 0