smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HP
Product:              DF0146B8052
Revision:             HPD6
User Capacity:        146'815'737'856 bytes [146 GB]
Logical block size:   512 bytes
Rotation Rate:        15000 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c50004ebe99f
Serial number:        3QN08C0T0000991051LJ
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Thu Nov 12 11:42:28 2015 WEST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     45 C
Drive Trip Temperature:        65 C

Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 3979476252
  Blocks received from initiator = 963057843
  Blocks read from cache and sent to initiator = 300900385
  Number of read and write commands whose size <= segment size = 948475991
  Number of read and write commands whose size > segment size = 1

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 28177.80
  number of minutes until next internal SMART test = 40

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0   2347917          0        219.376           0
write:         0        0         0         0          0        213.928           0

Non-medium error count:       18

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background long   Completed                   -   28176                 - [-   -    -]

Long (extended) Self Test duration: 1113 seconds [18.6 minutes]

Background scan results log
  Status: waiting until BMS interval timer expires
    Accumulated power on time, hours:minutes 28177:48 [1690668 minutes]
    Number of background scans performed: 1160,  scan progress: 0.00%
    Number of background medium scans performed: 1160

   #  when        lba(hex)    [sk,asc,ascq]    reassign_status
 33024 17878:27  0080010003110081  [0,b,ee]   Reserved [0x0]

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: SAS or SATA device
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; 3 Gbps
    attached initiator port: ssp=1 stp=1 smp=1
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000c50004ebe99d
    attached SAS address = 0x500e01800006c2c2
    attached phy identifier = 0
    Invalid DWORD count = 4
    Running disparity error count = 4
    Loss of DWORD synchronization = 1
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 4
     Running disparity error count: 4
     Loss of dword synchronization count: 1
     Phy reset problem count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; 1.5 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000c50004ebe99e
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0