smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win7-sp1] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HP
Product:              DG072ABAB3
Revision:             HPDF
User Capacity:        73'407'865'856 bytes [73.4 GB]
Logical block size:   512 bytes
Rotation Rate:        10033 rpm
Logical Unit id:      0x5000c500053b52e3
Serial number:        3NP1EG7P00009750MJBG
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Nov 10 23:44:13 2017 MZ
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     42 C
Drive Trip Temperature:        68 C

Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1208761953
  Blocks received from initiator = 712947316
  Blocks read from cache and sent to initiator = 1504031868
  Number of read and write commands whose size <= segment size = 646448748
  Number of read and write commands whose size > segment size = 0

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 50724.33
  number of minutes until next internal SMART test = 37

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0          0.000           0
write:         0        0         0         0          0          0.000           0

Non-medium error count:        0

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background long   Completed                   -   50723                 - [-   -    -]

Long (extended) Self Test duration: 1070 seconds [17.8 minutes]

Background scan results log
  Status: waiting until BMS interval timer expires
    Accumulated power on time, hours:minutes 50724:20 [3043460 minutes]
    Number of background scans performed: 1879,  scan progress: 0.00%
    Number of background medium scans performed: 0

   #  when        lba(hex)    [sk,asc,ascq]    reassign_status
   1 26217:31  00000000088adcac  [1,17,1]   Recovered via rewrite in-place
   2 32934:10  00000000086cc1ae  [1,17,1]   Recovered via rewrite in-place

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: SAS or SATA device
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; 3 Gbps
    attached initiator port: ssp=1 stp=1 smp=1
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000c500053b52e1
    attached SAS address = 0x500605b0050f9c20
    attached phy identifier = 3
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0