smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win7-sp1] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: HP Product: DG146BB976 Revision: HPDF User Capacity: 146'815'737'856 bytes [146 GB] Logical block size: 512 bytes Rotation Rate: 10033 rpm Logical Unit id: 0x5000c5000ede2a0b Serial number: 3NM7SHDD00009914TNZT Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Fri Nov 10 22:07:00 2017 MZ SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled Read Cache is: Enabled Writeback Cache is: Disabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 46 C Drive Trip Temperature: 68 C Elements in grown defect list: 1 Vendor (Seagate) cache information Blocks sent to initiator = 2646910822 Blocks received from initiator = 218210107 Blocks read from cache and sent to initiator = 490287999 Number of read and write commands whose size <= segment size = 277320913 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 48792.93 number of minutes until next internal SMART test = 4 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 0 0 0 0 0.000 0 write: 0 0 0 0 0 0.000 0 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background long Completed - 48792 - [- - -] Long (extended) Self Test duration: 2070 seconds [34.5 minutes] Background scan results log Status: waiting until BMS interval timer expires Accumulated power on time, hours:minutes 48792:56 [2927576 minutes] Number of background scans performed: 1946, scan progress: 0.00% Number of background medium scans performed: 0 # when lba(hex) [sk,asc,ascq] reassign_status 1 9156:47 000000000c4f32f3 [1,17,1] Recovered via rewrite in-place 2 25689:00 000000000c4f32f3 [1,17,3] Recovered via rewrite in-place 3 33460:11 00000000110d251d [1,17,1] Recovered via rewrite in-place 4 44237:02 000000000c4f32f3 [1,17,1] Recovered via rewrite in-place 5 44287:52 000000000c4f32f3 [1,17,1] Recovered via rewrite in-place 6 44338:33 000000000c4f32f3 [1,17,1] Successfully reassigned Protocol Specific port log page for SAS SSP relative target port id = 1 generation code = 0 number of phys = 1 phy identifier = 0 attached device type: SAS or SATA device attached reason: unknown reason: unknown negotiated logical link rate: phy enabled; 3 Gbps attached initiator port: ssp=1 stp=1 smp=1 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000c5000ede2a09 attached SAS address = 0x500605b0050f9c20 attached phy identifier = 3 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization = 0 Phy reset problem = 0 relative target port id = 2 generation code = 0 number of phys = 1 phy identifier = 1 attached device type: no device attached attached reason: unknown reason: unknown negotiated logical link rate: phy enabled; 3 Gbps attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000c5000ede2a0a attached SAS address = 0x0 attached phy identifier = 0 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization = 0 Phy reset problem = 0