smartctl 6.1 2013-03-16 r3800 [i686-w64-mingw32-win7-sp1] (sf-6.1-2) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K500 Device Model: HGST HTS545050A7E380 Serial Number: TM8512ZJ1UB24R LU WWN Device Id: 5 000cca 71fd99e55 Firmware Version: GG2OACA0 User Capacity: 500'107'862'016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Jul 19 22:56:24 2015 WEDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 108) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 214 100 033 - 1 4 Start_Stop_Count -O--CK 100 100 000 - 330 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 099 099 000 - 557 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 329 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 524288 188 Command_Timeout -O--CK 100 100 000 - 131073 190 Airflow_Temperature_Cel -O---K 064 049 045 - 36 (Min/Max 27/37) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 113 192 Power-Off_Retract_Count -O--CK 100 100 000 - 851981 193 Load_Cycle_Count -O--CK 096 096 000 - 43086 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 554 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 27/37 Celsius Lifetime Min/Max Temperature: 11/51 Celsius Lifetime Average Temperature: 34 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (43) Index Estimated Time Temperature Celsius 44 2015-07-19 20:49 41 ********************** 45 2015-07-19 20:50 41 ********************** 46 2015-07-19 20:51 41 ********************** 47 2015-07-19 20:52 42 *********************** ... ..( 8 skipped). .. *********************** 56 2015-07-19 21:01 42 *********************** 57 2015-07-19 21:02 43 ************************ ... ..( 70 skipped). .. ************************ 0 2015-07-19 22:13 43 ************************ 1 2015-07-19 22:14 42 *********************** 2 2015-07-19 22:15 43 ************************ 3 2015-07-19 22:16 43 ************************ 4 2015-07-19 22:17 42 *********************** 5 2015-07-19 22:18 43 ************************ 6 2015-07-19 22:19 42 *********************** ... ..( 6 skipped). .. *********************** 13 2015-07-19 22:26 42 *********************** 14 2015-07-19 22:27 41 ********************** 15 2015-07-19 22:28 41 ********************** 16 2015-07-19 22:29 41 ********************** 17 2015-07-19 22:30 40 ********************* 18 2015-07-19 22:31 ? - 19 2015-07-19 22:32 28 ********* 20 2015-07-19 22:33 29 ********** 21 2015-07-19 22:34 29 ********** 22 2015-07-19 22:35 29 ********** 23 2015-07-19 22:36 30 *********** ... ..( 2 skipped). .. *********** 26 2015-07-19 22:39 30 *********** 27 2015-07-19 22:40 31 ************ ... ..( 3 skipped). .. ************ 31 2015-07-19 22:44 31 ************ 32 2015-07-19 22:45 32 ************* 33 2015-07-19 22:46 33 ************** 34 2015-07-19 22:47 34 *************** 35 2015-07-19 22:48 35 **************** 36 2015-07-19 22:49 35 **************** 37 2015-07-19 22:50 36 ***************** 38 2015-07-19 22:51 36 ***************** 39 2015-07-19 22:52 37 ****************** 40 2015-07-19 22:53 37 ****************** 41 2015-07-19 22:54 37 ****************** 42 2015-07-19 22:55 36 ***************** 43 2015-07-19 22:56 36 ***************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS