smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-win7(64)-sp1] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               IBM-ESXS
Product:              VPA146C3-ETS10 N
Revision:             A650
User Capacity:        146'814'976'000 bytes [146 GB]
Logical block size:   512 bytes
Rotation Rate:        15000 rpm
Logical Unit id:      0x5000cca00729613f
Serial number:        JDXY0XRK
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Sat Aug 23 04:18:01 2014 WEDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     45 C
Drive Trip Temperature:        65 C

Manufactured in week 47 of year 2007
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  20
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 2875563836440576

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:      21685     7566         0     21685      21705       6523.901           0
write:    555375        0         0    555375          0       1290.327           0
verify:    61926    16559         0     61926          0       8324.630           0

Non-medium error count:        2

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background long   Completed                   -   40094                 - [-   -    -]

Long (extended) Self Test duration: 6142 seconds [102.4 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 40095:35 [2405735 minutes]
    Number of background scans performed: 0,  scan progress: 100.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: SAS or SATA device
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; 3 Gbps
    attached initiator port: ssp=1 stp=1 smp=1
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca00769613f
    attached SAS address = 0x500e01800006c2c3
    attached phy identifier = 1
    Invalid DWORD count = 12
    Running disparity error count = 0
    Loss of DWORD synchronization = 16
    Phy reset problem = 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca007a9613f
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0