smartctl 6.1 2013-03-16 r3800 [i686-w64-mingw32-win7-sp1] (sf-6.1-2) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD753LJ Serial Number: S13UJ1CQ705617 LU WWN Device Id: 5 0000f0 008076571 Firmware Version: 1AA01113 User Capacity: 750'155'292'160 bytes [750 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Mon Apr 28 06:55:04 2014 WEDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10762) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 180) minutes. Conveyance self-test routine recommended polling time: ( 19) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 090 051 - 4 3 Spin_Up_Time POS--- 076 076 011 - 8150 4 Start_Stop_Count -O--CK 097 097 000 - 2793 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 9937 9 Power_On_Hours -O--CK 098 098 000 - 9334 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 2733 13 Read_Soft_Error_Rate -OSR-- 100 090 000 - 4 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 836 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 047 000 - 37 (Min/Max 18/37) 194 Temperature_Celsius -O---K 065 044 000 - 35 (0 4 38 18 0) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 13560098 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 479 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 479 [6] occurred at disk power-on lifetime: 5916 hours (246 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 61 25 d4 e0 00 Error: UNC at LBA = 0x006125d4 = 6366676 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 61 25 cf e0 08 00:13:54.440 READ DMA EXT 25 00 00 00 08 00 00 00 61 25 c7 e0 08 00:13:54.440 READ DMA EXT 25 00 00 00 08 00 00 00 61 25 bf e0 08 00:13:54.440 READ DMA EXT 25 00 00 00 08 00 00 00 60 94 ef e0 08 00:13:54.430 READ DMA EXT Error 478 [5] occurred at disk power-on lifetime: 5916 hours (246 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 61 25 d4 e0 00 Error: UNC at LBA = 0x006125d4 = 6366676 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 61 25 bf e0 08 00:13:53.460 READ DMA EXT 25 00 00 00 08 00 00 01 c1 8f 2f e0 08 00:13:53.460 READ DMA EXT 35 00 00 00 08 00 00 00 61 25 af e0 08 00:13:53.460 WRITE DMA EXT 35 00 00 00 20 00 00 0b 0f 0f bf e0 08 00:13:53.460 WRITE DMA EXT 35 00 00 00 20 00 00 0d b3 44 5f e0 08 00:13:53.460 WRITE DMA EXT Error 477 [4] occurred at disk power-on lifetime: 5907 hours (246 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 61 25 d4 e0 00 Error: UNC at LBA = 0x006125d4 = 6366676 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 61 25 cf e0 08 00:07:07.240 READ DMA EXT 25 00 00 00 08 00 00 00 61 25 c7 e0 08 00:07:07.240 READ DMA EXT 25 00 00 00 40 00 00 00 22 3f 6f e0 08 00:07:07.230 READ DMA EXT 25 00 00 00 20 00 00 00 1d 74 ff e0 08 00:07:07.230 READ DMA EXT 25 00 00 00 20 00 00 00 1d 74 5f e0 08 00:07:07.220 READ DMA EXT Error 476 [3] occurred at disk power-on lifetime: 5907 hours (246 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 61 25 d4 e0 00 Error: UNC at LBA = 0x006125d4 = 6366676 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 61 25 bf e0 08 00:07:06.190 READ DMA EXT ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:07:06.170 FLUSH CACHE EXT 35 00 00 00 08 00 00 00 5e 00 47 e0 08 00:07:06.170 WRITE DMA EXT 35 00 00 00 10 00 00 04 ae 67 cf e0 08 00:07:06.170 WRITE DMA EXT ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:07:06.120 FLUSH CACHE EXT Error 475 [2] occurred at disk power-on lifetime: 5873 hours (244 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 61 25 d4 e0 00 Error: UNC at LBA = 0x006125d4 = 6366676 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 61 25 cf e0 08 02:20:56.250 READ DMA EXT 25 00 00 00 08 00 00 00 61 25 c7 e0 08 02:20:56.250 READ DMA EXT 35 00 00 00 08 00 00 00 5e 00 3f e0 08 02:20:56.250 WRITE DMA EXT 25 00 00 00 08 00 00 00 61 25 bf e0 08 02:20:56.250 READ DMA EXT 35 00 00 00 28 00 00 00 5e 58 9f e0 08 02:20:56.250 WRITE DMA EXT Error 474 [1] occurred at disk power-on lifetime: 5873 hours (244 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 61 25 d4 e0 00 Error: UNC at LBA = 0x006125d4 = 6366676 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 61 25 bf e0 08 02:20:55.210 READ DMA EXT 35 00 00 01 00 00 00 00 50 67 7f e0 08 02:20:55.210 WRITE DMA EXT 35 00 00 01 00 00 00 00 50 66 7f e0 08 02:20:55.210 WRITE DMA EXT 35 00 00 01 00 00 00 00 4e 57 2f e0 08 02:20:55.210 WRITE DMA EXT 35 00 00 01 00 00 00 00 4e 56 2f e0 08 02:20:55.210 WRITE DMA EXT Error 473 [0] occurred at disk power-on lifetime: 5861 hours (244 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 61 25 d4 e0 00 Error: UNC at LBA = 0x006125d4 = 6366676 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 61 25 cf e0 08 02:18:06.020 READ DMA EXT 25 00 00 00 08 00 00 00 61 25 c7 e0 08 02:18:06.020 READ DMA EXT 25 00 00 00 08 00 00 00 61 25 bf e0 08 02:18:06.020 READ DMA EXT Error 472 [7] occurred at disk power-on lifetime: 5861 hours (244 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 61 25 d4 e0 00 Error: UNC at LBA = 0x006125d4 = 6366676 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 61 25 bf e0 08 02:18:04.980 READ DMA EXT 35 00 00 00 68 00 00 01 4d 9b f7 e0 08 02:18:04.980 WRITE DMA EXT 35 00 00 01 00 00 00 01 4d 2f 5f e0 08 02:18:04.980 WRITE DMA EXT 35 00 00 01 00 00 00 01 4d 2e 5f e0 08 02:18:04.980 WRITE DMA EXT 35 00 00 01 00 00 00 01 4d 2d 5f e0 08 02:18:04.980 WRITE DMA EXT SMART Extended Self-test Log Version: 0 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 9333 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Max Temperature: 38 Celsius Lifetime Max Temperature: 56 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (15) Index Estimated Time Temperature Celsius 16 2014-04-28 04:48 38 ******************* ... ..( 28 skipped). .. ******************* 45 2014-04-28 05:17 38 ******************* 46 2014-04-28 05:18 37 ****************** ... ..( 2 skipped). .. ****************** 49 2014-04-28 05:21 37 ****************** 50 2014-04-28 05:22 38 ******************* 51 2014-04-28 05:23 37 ****************** ... ..( 21 skipped). .. ****************** 73 2014-04-28 05:45 37 ****************** 74 2014-04-28 05:46 36 ***************** ... ..( 11 skipped). .. ***************** 86 2014-04-28 05:58 36 ***************** 87 2014-04-28 05:59 35 **************** 88 2014-04-28 06:00 35 **************** 89 2014-04-28 06:01 35 **************** 90 2014-04-28 06:02 36 ***************** 91 2014-04-28 06:03 35 **************** ... ..( 38 skipped). .. **************** 2 2014-04-28 06:42 35 **************** 3 2014-04-28 06:43 34 *************** 4 2014-04-28 06:44 35 **************** ... ..( 10 skipped). .. **************** 15 2014-04-28 06:55 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC