smartctl 6.2 2013-07-26 r3841 [i686-w64-mingw32-win7(64)-sp1] (sf-6.2-1) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M5 Device Model: SAMSUNG HM160HI Serial Number: S14QJD0Q322379 LU WWN Device Id: 5 0f0000 03141a401 Firmware Version: HH100-11 User Capacity: 160'041'885'696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0 SATA Version is: SATA 2.5, 1.5 Gb/s Local Time is: Mon Apr 14 22:03:20 2014 WEDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 32) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 60) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 60) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 2 3 Spin_Up_Time POS--- 252 252 025 - 2062 4 Start_Stop_Count -O--CK 095 095 000 - 57352 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1443 12 Power_Cycle_Count -O--CK 100 100 000 - 962 191 G-Sense_Error_Rate -O--CK 072 072 000 - 285491 192 Power-Off_Retract_Count -O--CK 100 100 000 - 29 194 Temperature_Celsius -O---K 118 094 000 - 40 (0 48 0 0 0) 196 Reallocated_Event_Count -O--CK 100 100 000 - 7805 (0 1) 197 Current_Pending_Sector -O--C- 100 100 000 - 2440 198 Offline_Uncorrectable ----CK 100 100 000 - 2433 199 UDMA_CRC_Error_Count -OS-CK 252 252 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 252 252 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x08 SL R/O 1 Power Conditions log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80 GPL,SL R/W 16 Host vendor specific log 0x81-0x9f SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer ATA_READ_LOG_EXT (addr=0x03:0x00, page=1, n=1) failed: Input/output error Read SMART Extended Comprehensive Error Log failed SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1436 - # 2 Short offline Completed without error 00% 1 - # 3 Short offline Aborted by host 150% 1 - # 4 Short offline Completed without error 00% 0 - # 5 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Interrupted [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 39/43 Celsius Lifetime Min/Max Temperature: 0/-1 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 15/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (102) Index Estimated Time Temperature Celsius 103 2014-04-14 19:56 41 ********************** ... ..( 20 skipped). .. ********************** 124 2014-04-14 20:17 41 ********************** 125 2014-04-14 20:18 39 ******************** 126 2014-04-14 20:19 38 ******************* ... ..( 6 skipped). .. ******************* 5 2014-04-14 20:26 38 ******************* 6 2014-04-14 20:27 41 ********************** ... ..( 2 skipped). .. ********************** 9 2014-04-14 20:30 41 ********************** 10 2014-04-14 20:31 ? - 11 2014-04-14 20:32 41 ********************** 12 2014-04-14 20:33 41 ********************** 13 2014-04-14 20:34 41 ********************** 14 2014-04-14 20:35 43 ************************ 15 2014-04-14 20:36 43 ************************ 16 2014-04-14 20:37 42 *********************** ... ..( 56 skipped). .. *********************** 73 2014-04-14 21:34 42 *********************** 74 2014-04-14 21:35 41 ********************** 75 2014-04-14 21:36 41 ********************** 76 2014-04-14 21:37 40 ********************* 77 2014-04-14 21:38 40 ********************* 78 2014-04-14 21:39 39 ******************** ... ..( 6 skipped). .. ******************** 85 2014-04-14 21:46 39 ******************** 86 2014-04-14 21:47 42 *********************** 87 2014-04-14 21:48 42 *********************** 88 2014-04-14 21:49 41 ********************** 89 2014-04-14 21:50 41 ********************** 90 2014-04-14 21:51 40 ********************* 91 2014-04-14 21:52 40 ********************* 92 2014-04-14 21:53 39 ******************** ... ..( 5 skipped). .. ******************** 98 2014-04-14 21:59 39 ******************** 99 2014-04-14 22:00 40 ********************* ... ..( 2 skipped). .. ********************* 102 2014-04-14 22:03 40 ********************* SCT Error Recovery Control: Read: 270 (27.0 seconds) Write: 270 (27.0 seconds) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x8001 2 0 Vendor specific