smartctl 6.1 2013-03-16 r3800 [i686-w64-mingw32-win7-sp1] (sf-6.1-2) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M6 Device Model: SAMSUNG HM320JI Serial Number: S19FJD0Q700575 LU WWN Device Id: 5 0f0000 03196a401 Firmware Version: 2SS00_01 User Capacity: 320'072'933'376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 0 SATA Version is: SATA 2.5, 1.5 Gb/s Local Time is: Mon Jul 11 21:21:07 2016 WEDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 122) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 122) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 252 252 025 - 2687 4 Start_Stop_Count -O--CK 098 098 000 - 29010 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 9 Power_On_Hours -O--CK 096 096 000 - 2199 12 Power_Cycle_Count -O--CK 098 098 000 - 2136 191 G-Sense_Error_Rate -O--CK 100 100 000 - 3284 192 Power-Off_Retract_Count -O--CK 100 100 000 - 173 194 Temperature_Celsius -O---K 136 082 000 - 34 (Min/Max 15/52) 196 Reallocated_Event_Count -O--CK 100 100 000 - 59919 (0 1) 197 Current_Pending_Sector -O--C- 100 100 000 - 4920 198 Offline_Uncorrectable ----CK 100 100 000 - 20872 199 UDMA_CRC_Error_Count -OS-CK 252 252 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 252 252 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x08 SL R/O 1 Power Conditions log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80 GPL,SL R/W 16 Host vendor specific log 0x81-0x9f SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 2197 - # 2 Short offline Completed without error 00% 1579 - # 3 Short offline Interrupted (host reset) 30% 1112 - # 4 Short offline Interrupted (host reset) 50% 1081 - # 5 Short offline Completed without error 00% 2 - # 6 Short offline Completed without error 00% 1 - # 7 Short offline Interrupted (host reset) 60% 0 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 28/39 Celsius Lifetime Min/Max Temperature: 17/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 15/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (79) Index Estimated Time Temperature Celsius 80 2016-07-11 19:14 39 ******************** ... ..( 66 skipped). .. ******************** 19 2016-07-11 20:21 39 ******************** 20 2016-07-11 20:22 38 ******************* ... ..( 7 skipped). .. ******************* 28 2016-07-11 20:30 38 ******************* 29 2016-07-11 20:31 39 ******************** ... ..( 19 skipped). .. ******************** 49 2016-07-11 20:51 39 ******************** 50 2016-07-11 20:52 38 ******************* 51 2016-07-11 20:53 37 ****************** 52 2016-07-11 20:54 37 ****************** 53 2016-07-11 20:55 36 ***************** ... ..( 4 skipped). .. ***************** 58 2016-07-11 21:00 36 ***************** 59 2016-07-11 21:01 37 ****************** ... ..( 3 skipped). .. ****************** 63 2016-07-11 21:05 37 ****************** 64 2016-07-11 21:06 38 ******************* 65 2016-07-11 21:07 37 ****************** 66 2016-07-11 21:08 37 ****************** 67 2016-07-11 21:09 36 ***************** 68 2016-07-11 21:10 35 **************** ... ..( 5 skipped). .. **************** 74 2016-07-11 21:16 35 **************** 75 2016-07-11 21:17 34 *************** ... ..( 3 skipped). .. *************** 79 2016-07-11 21:21 34 *************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x8001 2 0 Vendor specific