smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win7-sp1] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST3600057SS Revision: HPS1 User Capacity: 600'127'266'816 bytes [600 GB] Logical block size: 512 bytes Rotation Rate: 15000 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c5005a90b5b3 Serial number: 6SL596BW0000B3180NEP Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Sun Nov 12 02:22:17 2017 MZ SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled Read Cache is: Enabled Writeback Cache is: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 58 C Drive Trip Temperature: 65 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 1896905902 Blocks received from initiator = 2524529309 Blocks read from cache and sent to initiator = 49450562 Number of read and write commands whose size <= segment size = 3189885 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 9236.28 number of minutes until next internal SMART test = 43 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 0 0 3904548 0 700.633 2 write: 0 0 0 0 0 1302.200 0 verify: 0 0 0 13 0 0.000 0 Non-medium error count: 3 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background long Completed - 9236 - [- - -] # 2 Background long Completed - 9208 - [- - -] Long (extended) Self Test duration: 3730 seconds [62.2 minutes] Background scan results log Status: scan is active Accumulated power on time, hours:minutes 9236:17 [554177 minutes] Number of background scans performed: 431, scan progress: 65.54% Number of background medium scans performed: 431 Protocol Specific port log page for SAS SSP relative target port id = 1 generation code = 0 number of phys = 1 phy identifier = 0 attached device type: SAS or SATA device attached reason: loss of dword synchronization reason: power on negotiated logical link rate: phy enabled; 6 Gbps attached initiator port: ssp=1 stp=1 smp=1 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000c5005a90b5b1 attached SAS address = 0x500605b0050f9c20 attached phy identifier = 3 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization = 0 Phy reset problem = 0 Phy event descriptors: Invalid word count: 0 Running disparity error count: 0 Loss of dword synchronization count: 0 Phy reset problem count: 0 relative target port id = 2 generation code = 0 number of phys = 1 phy identifier = 1 attached device type: no device attached attached reason: unknown reason: unknown negotiated logical link rate: phy enabled; 1.5 Gbps attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000c5005a90b5b2 attached SAS address = 0x0 attached phy identifier = 0 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization = 0 Phy reset problem = 0 Phy event descriptors: Invalid word count: 0 Running disparity error count: 0 Loss of dword synchronization count: 0 Phy reset problem count: 0