smartctl 6.1 2013-03-16 r3800 [i686-w64-mingw32-win7-sp1] (sf-6.1-2) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD10EARS-00Y5B1 Serial Number: WD-WCAV5P767366 LU WWN Device Id: 5 0014ee 2b04a894b Firmware Version: 80.00A80 User Capacity: 1'000'204'886'016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Feb 16 20:09:51 2015 WEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 236) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 188 185 021 - 6591 4 Start_Stop_Count -O--CK 097 097 000 - 3594 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 090 090 000 - 8005 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3531 192 Power-Off_Retract_Count -O--CK 200 200 000 - 30 193 Load_Cycle_Count -O--CK 192 192 000 - 24594 194 Temperature_Celsius -O---K 111 099 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 7997 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 26/37 Celsius Lifetime Min/Max Temperature: 37/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (252) Index Estimated Time Temperature Celsius 253 2015-02-16 12:12 37 ****************** ... ..( 11 skipped). .. ****************** 265 2015-02-16 12:24 37 ****************** 266 2015-02-16 12:25 36 ***************** ... ..( 8 skipped). .. ***************** 275 2015-02-16 12:34 36 ***************** 276 2015-02-16 12:35 37 ****************** ... ..( 83 skipped). .. ****************** 360 2015-02-16 13:59 37 ****************** 361 2015-02-16 14:00 ? - 362 2015-02-16 14:01 26 ******* 363 2015-02-16 14:02 ? - 364 2015-02-16 14:03 26 ******* 365 2015-02-16 14:04 27 ******** ... ..( 4 skipped). .. ******** 370 2015-02-16 14:09 27 ******** 371 2015-02-16 14:10 28 ********* 372 2015-02-16 14:11 28 ********* 373 2015-02-16 14:12 29 ********** 374 2015-02-16 14:13 29 ********** 375 2015-02-16 14:14 29 ********** 376 2015-02-16 14:15 30 *********** 377 2015-02-16 14:16 30 *********** 378 2015-02-16 14:17 30 *********** 379 2015-02-16 14:18 31 ************ 380 2015-02-16 14:19 31 ************ 381 2015-02-16 14:20 31 ************ 382 2015-02-16 14:21 32 ************* ... ..( 4 skipped). .. ************* 387 2015-02-16 14:26 32 ************* 388 2015-02-16 14:27 33 ************** ... ..( 3 skipped). .. ************** 392 2015-02-16 14:31 33 ************** 393 2015-02-16 14:32 34 *************** ... ..( 4 skipped). .. *************** 398 2015-02-16 14:37 34 *************** 399 2015-02-16 14:38 35 **************** ... ..( 16 skipped). .. **************** 416 2015-02-16 14:55 35 **************** 417 2015-02-16 14:56 36 ***************** ... ..( 20 skipped). .. ***************** 438 2015-02-16 15:17 36 ***************** 439 2015-02-16 15:18 37 ****************** ... ..(151 skipped). .. ****************** 113 2015-02-16 17:50 37 ****************** 114 2015-02-16 17:51 36 ***************** 115 2015-02-16 17:52 37 ****************** ... ..( 8 skipped). .. ****************** 124 2015-02-16 18:01 37 ****************** 125 2015-02-16 18:02 34 *************** ... ..( 4 skipped). .. *************** 130 2015-02-16 18:07 34 *************** 131 2015-02-16 18:08 33 ************** 132 2015-02-16 18:09 34 *************** 133 2015-02-16 18:10 33 ************** ... ..( 41 skipped). .. ************** 175 2015-02-16 18:52 33 ************** 176 2015-02-16 18:53 34 *************** ... ..( 2 skipped). .. *************** 179 2015-02-16 18:56 34 *************** 180 2015-02-16 18:57 35 **************** ... ..( 15 skipped). .. **************** 196 2015-02-16 19:13 35 **************** 197 2015-02-16 19:14 36 ***************** ... ..( 20 skipped). .. ***************** 218 2015-02-16 19:35 36 ***************** 219 2015-02-16 19:36 37 ****************** ... ..( 32 skipped). .. ****************** 252 2015-02-16 20:09 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 14367 Vendor specific