smartctl 7.2 2021-09-14 r5237 [x86_64-linux-5.14.21-150400.24.33-default] (SUSE RPM) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-75M2NA0 Serial Number: WD-WCC3F4769396 LU WWN Device Id: 5 0014ee 2b4d42bb7 Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jun 23 06:25:59 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 118) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 169 021 - 2158 4 Start_Stop_Count -O--CK 096 096 000 - 4159 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 091 091 000 - 7055 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1910 192 Power-Off_Retract_Count -O--CK 200 200 000 - 142 193 Load_Cycle_Count -O--CK 155 155 000 - 135868 194 Temperature_Celsius -O---K 114 090 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 240 Head_Flying_Hours -O--CK 098 098 000 - 1879 241 Total_LBAs_Written -O--CK 200 200 000 - 38175459914 242 Total_LBAs_Read -O--CK 200 200 000 - 61129407790 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 7055 - # 2 Short offline Completed without error 00% 7053 - # 3 Extended offline Completed without error 00% 306 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 27/31 Celsius Lifetime Min/Max Temperature: 17/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (276) Index Estimated Time Temperature Celsius 277 2024-06-22 22:28 30 *********** 278 2024-06-22 22:29 ? - 279 2024-06-22 22:30 29 ********** 280 2024-06-22 22:31 30 *********** 281 2024-06-22 22:32 ? - 282 2024-06-22 22:33 29 ********** 283 2024-06-22 22:34 ? - 284 2024-06-22 22:35 29 ********** 285 2024-06-22 22:36 ? - 286 2024-06-22 22:37 22 *** 287 2024-06-22 22:38 ? - 288 2024-06-22 22:39 24 ***** 289 2024-06-22 22:40 25 ****** 290 2024-06-22 22:41 25 ****** 291 2024-06-22 22:42 26 ******* 292 2024-06-22 22:43 26 ******* 293 2024-06-22 22:44 ? - 294 2024-06-22 22:45 27 ******** 295 2024-06-22 22:46 ? - 296 2024-06-22 22:47 27 ******** 297 2024-06-22 22:48 ? - 298 2024-06-22 22:49 27 ******** 299 2024-06-22 22:50 28 ********* ... ..( 9 skipped). .. ********* 309 2024-06-22 23:00 28 ********* 310 2024-06-22 23:01 29 ********** ... ..( 34 skipped). .. ********** 345 2024-06-22 23:36 29 ********** 346 2024-06-22 23:37 30 *********** ... ..( 8 skipped). .. *********** 355 2024-06-22 23:46 30 *********** 356 2024-06-22 23:47 31 ************ ... ..( 87 skipped). .. ************ 444 2024-06-23 01:15 31 ************ 445 2024-06-23 01:16 30 *********** ... ..(118 skipped). .. *********** 86 2024-06-23 03:15 30 *********** 87 2024-06-23 03:16 31 ************ 88 2024-06-23 03:17 31 ************ 89 2024-06-23 03:18 30 *********** ... ..( 2 skipped). .. *********** 92 2024-06-23 03:21 30 *********** 93 2024-06-23 03:22 29 ********** ... ..(129 skipped). .. ********** 223 2024-06-23 05:32 29 ********** 224 2024-06-23 05:33 30 *********** ... ..( 47 skipped). .. *********** 272 2024-06-23 06:21 30 *********** 273 2024-06-23 06:22 29 ********** 274 2024-06-23 06:23 30 *********** 275 2024-06-23 06:24 30 *********** 276 2024-06-23 06:25 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 16760 Vendor specific