smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-win7(64)-sp1] (sf-6.4-1) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD20EZRX-00DC0B0 Serial Number: WD-WMC1T2310830 LU WWN Device Id: 5 0014ee 058db58d1 Firmware Version: 80.00A80 User Capacity: 2'000'398'934'016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Dec 12 23:15:34 2020 MZ SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (27060) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 273) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 177 176 021 - 6133 4 Start_Stop_Count -O--CK 100 100 000 - 185 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 675 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 182 192 Power-Off_Retract_Count -O--CK 200 200 000 - 140 193 Load_Cycle_Count -O--CK 198 198 000 - 6125 194 Temperature_Celsius -O---K 115 107 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 643 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 22/35 Celsius Lifetime Min/Max Temperature: 19/42 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (312) Index Estimated Time Temperature Celsius 313 2020-12-12 15:18 31 ************ ... ..( 7 skipped). .. ************ 321 2020-12-12 15:26 31 ************ 322 2020-12-12 15:27 32 ************* ... ..( 12 skipped). .. ************* 335 2020-12-12 15:40 32 ************* 336 2020-12-12 15:41 33 ************** ... ..( 23 skipped). .. ************** 360 2020-12-12 16:05 33 ************** 361 2020-12-12 16:06 34 *************** ... ..(349 skipped). .. *************** 233 2020-12-12 21:56 34 *************** 234 2020-12-12 21:57 ? - 235 2020-12-12 21:58 22 *** 236 2020-12-12 21:59 22 *** 237 2020-12-12 22:00 22 *** 238 2020-12-12 22:01 23 **** 239 2020-12-12 22:02 23 **** 240 2020-12-12 22:03 24 ***** 241 2020-12-12 22:04 24 ***** 242 2020-12-12 22:05 25 ****** 243 2020-12-12 22:06 25 ****** 244 2020-12-12 22:07 25 ****** 245 2020-12-12 22:08 26 ******* 246 2020-12-12 22:09 26 ******* 247 2020-12-12 22:10 26 ******* 248 2020-12-12 22:11 27 ******** ... ..( 4 skipped). .. ******** 253 2020-12-12 22:16 27 ******** 254 2020-12-12 22:17 28 ********* ... ..( 5 skipped). .. ********* 260 2020-12-12 22:23 28 ********* 261 2020-12-12 22:24 29 ********** 262 2020-12-12 22:25 29 ********** 263 2020-12-12 22:26 29 ********** 264 2020-12-12 22:27 30 *********** 265 2020-12-12 22:28 30 *********** 266 2020-12-12 22:29 30 *********** 267 2020-12-12 22:30 31 ************ ... ..( 2 skipped). .. ************ 270 2020-12-12 22:33 31 ************ 271 2020-12-12 22:34 32 ************* 272 2020-12-12 22:35 32 ************* 273 2020-12-12 22:36 32 ************* 274 2020-12-12 22:37 33 ************** ... ..( 5 skipped). .. ************** 280 2020-12-12 22:43 33 ************** 281 2020-12-12 22:44 34 *************** ... ..( 2 skipped). .. *************** 284 2020-12-12 22:47 34 *************** 285 2020-12-12 22:48 35 **************** ... ..( 26 skipped). .. **************** 312 2020-12-12 23:15 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 4649 Vendor specific