smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-win7(64)-sp1] (sf-6.4-1) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD2500AAKX-001CA0 Serial Number: WD-WMAYV1550793 LU WWN Device Id: 5 0014ee 003072f1c Firmware Version: 15.01H15 User Capacity: 250'059'350'016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jul 15 16:51:34 2017 MS SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4260) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 46) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 149 137 021 - 3533 4 Start_Stop_Count -O--CK 100 100 000 - 149 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 536 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 141 192 Power-Off_Retract_Count -O--CK 200 200 000 - 137 193 Load_Cycle_Count -O--CK 200 200 000 - 11 194 Temperature_Celsius -O---K 107 096 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 54 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 535 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 27/39 Celsius Lifetime Min/Max Temperature: 11/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (240) Index Estimated Time Temperature Celsius 241 2017-07-15 08:54 30 *********** ... ..(325 skipped). .. *********** 89 2017-07-15 14:20 30 *********** 90 2017-07-15 14:21 29 ********** ... ..( 4 skipped). .. ********** 95 2017-07-15 14:26 29 ********** 96 2017-07-15 14:27 ? - 97 2017-07-15 14:28 27 ******** 98 2017-07-15 14:29 29 ********** 99 2017-07-15 14:30 29 ********** 100 2017-07-15 14:31 30 *********** 101 2017-07-15 14:32 31 ************ 102 2017-07-15 14:33 32 ************* 103 2017-07-15 14:34 32 ************* 104 2017-07-15 14:35 33 ************** 105 2017-07-15 14:36 33 ************** 106 2017-07-15 14:37 34 *************** 107 2017-07-15 14:38 34 *************** 108 2017-07-15 14:39 35 **************** ... ..( 4 skipped). .. **************** 113 2017-07-15 14:44 35 **************** 114 2017-07-15 14:45 36 ***************** ... ..( 5 skipped). .. ***************** 120 2017-07-15 14:51 36 ***************** 121 2017-07-15 14:52 37 ****************** ... ..( 9 skipped). .. ****************** 131 2017-07-15 15:02 37 ****************** 132 2017-07-15 15:03 38 ******************* 133 2017-07-15 15:04 37 ****************** 134 2017-07-15 15:05 38 ******************* ... ..( 38 skipped). .. ******************* 173 2017-07-15 15:44 38 ******************* 174 2017-07-15 15:45 39 ******************** ... ..( 2 skipped). .. ******************** 177 2017-07-15 15:48 39 ******************** 178 2017-07-15 15:49 38 ******************* ... ..( 3 skipped). .. ******************* 182 2017-07-15 15:53 38 ******************* 183 2017-07-15 15:54 39 ******************** 184 2017-07-15 15:55 39 ******************** 185 2017-07-15 15:56 39 ******************** 186 2017-07-15 15:57 38 ******************* ... ..( 10 skipped). .. ******************* 197 2017-07-15 16:08 38 ******************* 198 2017-07-15 16:09 39 ******************** ... ..( 5 skipped). .. ******************** 204 2017-07-15 16:15 39 ******************** 205 2017-07-15 16:16 38 ******************* ... ..( 3 skipped). .. ******************* 209 2017-07-15 16:20 38 ******************* 210 2017-07-15 16:21 37 ****************** ... ..( 12 skipped). .. ****************** 223 2017-07-15 16:34 37 ****************** 224 2017-07-15 16:35 36 ***************** ... ..( 15 skipped). .. ***************** 240 2017-07-15 16:51 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 8607 Vendor specific