smartctl 6.4 2015-06-04 r4109 [i686-w64-mingw32-win7(64)-sp1] (sf-6.4-1) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black Device Model: WDC WD2500BEKT-60F3T1 Serial Number: WD-WXD0A99W8349 LU WWN Device Id: 5 0014ee 2ae1ee2c1 Firmware Version: 12.01A12 User Capacity: 250'059'350'016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Sat Aug 29 23:35:52 2020 MS SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6300) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 76) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 173 021 - 2158 4 Start_Stop_Count -O--CK 093 093 000 - 7047 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1186 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2826 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 096 000 - 9 190 Airflow_Temperature_Cel -O---K 070 045 040 - 30 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 200 200 000 - 21 193 Load_Cycle_Count -O--CK 191 191 000 - 27570 194 Temperature_Celsius -O---K 117 092 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 1186 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 22/39 Celsius Lifetime Min/Max Temperature: 30/55 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (104) Index Estimated Time Temperature Celsius 105 2020-08-29 21:28 30 *********** ... ..( 2 skipped). .. *********** 108 2020-08-29 21:31 30 *********** 109 2020-08-29 21:32 31 ************ 110 2020-08-29 21:33 32 ************* 111 2020-08-29 21:34 33 ************** ... ..( 3 skipped). .. ************** 115 2020-08-29 21:38 33 ************** 116 2020-08-29 21:39 32 ************* 117 2020-08-29 21:40 32 ************* 118 2020-08-29 21:41 32 ************* 119 2020-08-29 21:42 33 ************** 120 2020-08-29 21:43 33 ************** 121 2020-08-29 21:44 34 *************** 122 2020-08-29 21:45 34 *************** 123 2020-08-29 21:46 34 *************** 124 2020-08-29 21:47 33 ************** 125 2020-08-29 21:48 33 ************** 126 2020-08-29 21:49 33 ************** 127 2020-08-29 21:50 32 ************* 0 2020-08-29 21:51 32 ************* 1 2020-08-29 21:52 32 ************* 2 2020-08-29 21:53 33 ************** 3 2020-08-29 21:54 33 ************** 4 2020-08-29 21:55 34 *************** 5 2020-08-29 21:56 34 *************** 6 2020-08-29 21:57 34 *************** 7 2020-08-29 21:58 35 **************** 8 2020-08-29 21:59 35 **************** 9 2020-08-29 22:00 36 ***************** 10 2020-08-29 22:01 36 ***************** 11 2020-08-29 22:02 36 ***************** 12 2020-08-29 22:03 37 ****************** ... ..( 55 skipped). .. ****************** 68 2020-08-29 22:59 37 ****************** 69 2020-08-29 23:00 35 **************** 70 2020-08-29 23:01 35 **************** 71 2020-08-29 23:02 34 *************** 72 2020-08-29 23:03 34 *************** 73 2020-08-29 23:04 34 *************** 74 2020-08-29 23:05 33 ************** 75 2020-08-29 23:06 32 ************* 76 2020-08-29 23:07 32 ************* 77 2020-08-29 23:08 31 ************ ... ..( 7 skipped). .. ************ 85 2020-08-29 23:16 31 ************ 86 2020-08-29 23:17 30 *********** ... ..( 17 skipped). .. *********** 104 2020-08-29 23:35 30 *********** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x8000 4 23117 Vendor specific